Original link: https://www.feidaoboke.com/post/open-midea-ac-front-panel.html
Record the method of removing the dust from the filter screen of the Midea model KFR-72LW /BP2DY-E cabinet machine.
If netizens search for this article, they must ask to compare the photos and models. If they are consistent, they can open the front panel by “hard breaking” the panel, because it is fixed by two powerful magnets without screws.
After breaking off the panel, unscrew the two limit rope screws, and then lift up the two sides of the panel, the panel can be taken down, and the air inlet filters on both sides and the lower side can be pulled down for cleaning.
You don’t even need to remove the panel if you only need to clean the filters on both sides.
After removing the panel, there is a large turbine in the middle, and there is a lot of dust on the fan blades. Before removing the turbine, you must first remove the black plastic ring in front of the turbine. This ring can be easily removed by rotating it first. Do not pull it hard After removing the plastic ring, use a wrench to unscrew the nut in the center of the turbine to remove the turbine blades and clean the dust.
Before, I searched on the Internet for several beautiful ways to remove the panel of the cabinet. Some of them have screws in the side remote control storage box, and some of them have the whole panel lifted upwards. I didn’t expect this KFR-72LW /BP2DY-E to be hard. of.
Finally, let me remind you that if netizens search for this article, they must confirm the model before doing it.
This article is transferred from: https://www.feidaoboke.com/post/open-midea-ac-front-panel.html
This site is only for collection, and the copyright belongs to the original author.